PCB Design Rules

• Minimum track width = 15 mil (0.37mm)
• Minimum track spacing = 15 mil (0.37mm)
• Smallest hole drilled = 0.8 mm
• Keep pads at least twice the diameter of the hole inside.

1 mil is 1 thousandth of an inch.

Photographs

I can do down to 10:10 tracks if I take a photo. This
is an extra R120*.

Designation	Min track width	Min track spacing
15:15	15mil	15mil
10:10	10mil	10mil

*All prices exclude VAT

Home